The 200 micron drum strainer starts the process by eliminating larger particles. The 55gal drum has a lower sludge drain and upper pump suction to ensure any particles that settle out stay in the drum with enough room between them to accommodate the 120vac, 12.5 amps, 1500 watt flexible silicone 55 gal drum heater. The 110 vac pump has a 5 foot grounded cord, internal bypass and 50 micron filter, on/off switch and delivers the WVO to the light industrial filter housing at 18 gpm. The light industrial filter provides 2.0 ft² of surface area at up to 55gpm with filter rating of 1 micron absolute to 5 micron nominal. The hose and fuel nozzle make it easy to pump the oil from the drum. All fittings are polypropylene with viton gaskets. Valves feature viton seals, Teflon seats and stainless bolts.

This package includes: 55gal drum w/ holes pre-drilled, 1500 watt Brisk drum heater, 200m drum strainer, pump with internal bypass, pump mounting cleats, pressure gauge, magnetic surface mount thermometer, filter housing, 5 micron nominal polypropylene bag filter, welded steel filter stand, 5' of clear braided hose, 20' of fuel hose, fuel nozzle, gate valves and all necessary fittings. A lid will come with the drum.

Our units are equipped with an “open top” design for drying of the oil. This allows for water and moisture to evaporate during the heating and process time. If the lid is on the moisture has no where to escape and will fall back into your oil.

Assembly directions will be sent via email.

Filtration Unit is now equipped with gate valves.